11:1 cycloidal speed reducer
Gearboxes · One sentence
11:1 cycloidal speed reducer
- ratio
- 11 : 1
- parts
- 34
- mass
- 2.58 kg
Download the CAD files
Free download. Open the full design in Luxxo CAD (opens in a new tab)
This 11:1 cycloidal speed reducer was designed by the Luxxo CAD AI from a one-sentence request. It has 34 parts, measures 110 × 110 × 83 mm and weighs 2.58 kg, in steel S235. Below you can read the request, the main specifications and the problems the AI flagged, and download the STEP, STL, DXF and A3 drawing for free.
The request
“A 11:1 cycloidal speed reducer assembly in steel.”
The whole request.
Specifications
- Ratio
- 11 : 1, output reversed
- Discs
- 2 × 11 lobes, 180° out of phase
- Ring pins
- 12 × Ø6 on Ø80
- Output torque
- ≈ 17 Nm at 136 rpm (estimated)
Flagged by the AI
- S235 suits a prototype only; pins and discs need hardened steel (100Cr6, 58–62 HRC) for wear life.
- The eccentric input shaft is overhung on one bearing. A pilot bearing in the output flange would add stiffness.
Design your own in one sentence.
Describe a part or upload a hand sketch. 5 free designs, no card needed. Then from €9.
Strain wave gear 50:1
Two-stage planetary gearbox 36:1
Dual-disc cycloidal reducer 29:1