For laser, sheet-metal and fabrication shops
Customer sketch in.
STEP, DXF and drawing out.
Type what the customer wants, or upload the photo of their sketch. Luxxo CAD builds the 3D model and gives you the flat blank for the laser, a dimensioned A3 drawing and a price for 1, 10 and 100 pieces.
No card. In your browser. Prices from €9.
One request. The whole job package.
STEP
Opens in SolidWorks, Inventor, Creo, Fusion and FreeCAD. Clean solids, not meshes.
DXF flat pattern
Developed blank with bend lines and holes, plus a cut list with thickness and cut length.
A3 drawing
Three views, isometric, driving dimensions, hole table and notes, ready to send.
Price estimate
Material, cutting, bending and setup with your own shop rates, for 1, 10 and 100 pieces.
Real output, not a mock-up.
This L-bracket came from one sentence: “L-bracket bent from 2 mm aluminium sheet, legs 50 and 30 mm, width 40 mm, inside radius 2 mm, two 4.5 mm holes in each leg, 20 mm apart.” The model was ready in about 20 seconds.
Six of the twenty parts from our test on 4 November 2026: sheet bracket, mounting plate, flange, two enclosures, bearing block.
Tested, not promised.
Our own test on 4 November 2026 with twenty brackets, plates, enclosures, adapters and spacers. The two misses were sheet-metal parts a U-channel 1 mm short at a free edge and a Z-bracket built the wrong way round. Both cases are now covered by new rules in the AI's instructions.
It flags what your foreman would.
- Hole closer to the edge than 1.5 × sheet thickness.
- Hole too close to a bend: it would deform on the brake.
- 6061-T6 bent at 1t: risk of cracking, use a larger radius or another temper.
- Parts in an assembly that collide.
- Designs with a problem are marked “Needs review”, with the reason in plain words.
Made for small shops without a CAD person.
- Quote requests arrive as phone photos, napkin sketches or a few words in an e-mail.
- Nobody has time to redraw a simple bracket in SolidWorks before quoting it.
- You want a drawing and a DXF the customer can approve before you cut.
Pay for designs, not seats.
Free
€05 designs, once per e-mail
Starter pack
€910 credits, valid 12 months
Workshop
€49 / month100 credits every month, cancel any time
1 credit = 1 new design or 1 change. Failed jobs never use a credit. Downloads are free. Prices exclude VAT.
Questions from workshops
Do I need to know CAD?
No. You describe the part in normal words, with dimensions, or upload a sketch. You can change it with one sentence, like “make the hole 8 mm”.
Is the result ready to cut?
It is an engineering draft with checks and warnings. You check the drawing like a colleague's work before cutting. Confirm bend deductions with your press brake before series production.
Which files can I use on my machines?
DXF R12 for laser, plasma and waterjet, STEP for CAD and CAM, STL for 3D printing, PDF for the customer.
Who sees my customers' designs?
Only you, unless you create a share link. Files are private to your account.
Talk to the engineer who built it.
Luxxo CAD is built by Momo Lažetić, a mechanical engineer with 17 years in design. Send a sketch you quoted recently to info@luxxo.sk and get the STEP, DXF and drawing back, free.