Open bevel gear differential
Gearboxes · Detailed spec
Open bevel gear differential
- final ratio
- 4.17 : 1
- parts
- 37
- mass
- 6.2 kg
Download the CAD files
Free download. Open the full design in Luxxo CAD (opens in a new tab)
This open bevel gear differential was designed by the Luxxo CAD AI from a detailed-spec request. It has 37 parts, measures 138 × 174 × 205 mm and weighs 6.2 kg, in steel S235. Below you can read the request, the main specifications and the problems the AI flagged, and download the STEP, STL, DXF and A3 drawing for free.
The request
“Open differential, straight bevel gears, module 2. Ring gear 50T driven by a 12T pinion at 90°.”
First line of the request.
Specifications
- Final ratio
- 50 : 12 = 4.17 : 1
- Ring gear
- Pitch Ø100
- Spider / side gears
- Two 10T / two 16T
- Carrier
- On two 6006 bearings
Flagged by the AI
- A 12-tooth pinion is below the undercut-free minimum for straight bevel gears; use profile shift or a spiral bevel set.
Design your own in one sentence.
Describe a part or upload a hand sketch. 5 free designs, no card needed. Then from €9.
Strain wave gear 50:1
Two-stage planetary gearbox 36:1
Dual-disc cycloidal reducer 29:1